X6000 Series Load Modules

Network Test Modules
Network Performance Test
X6000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and qualit
X6000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and quality control.
X6000 series test modules support up to 16 gigabit COMBO ports and support Cross-chassis synchronizing to provide large-scale protocol emulation, performance test and mass traffic stress test of Layer 2-7 network device.
X6000 series modules support TeleExplorer, TeleAPP to meet different test needs. TeleExplorer is a standard test suite providing L2-7 test functions with powerful and flexible configuration. TeleAPP is a test suite to provide automated test of RFC2544 /2889/3918 with easy-to-use configuration and necessary test report output. X6000 also support TCL and API to meet customized testing requirements.
SPECIFICATIONS

Model	X6004D	X6008D	X6016D
Port Number	4 * 1000M	8 * 1000M	16* 1000M
Port Rate	RJ45：10/100/1000M SFP：100/1000M COMBO ports	RJ45：10/100/1000M SFP：100/1000M COMBO ports	RJ45：10/100/1000M SFP：100/1000M COMBO ports
Physical	Status Indicators: Tx/Rx Weight: 0.5kg Size: 271mm x 35.5mm x 180mm  Peak power requirement: 100W Max
Traffic Generation	Traffic generating based on port and stream, per port have 64 different streams Each stream provide up to 4 saltus step domain with mode of increase, decrease and random Accurate data rate regulation based on port and stream, support dynamic data rate regulation based on port Each stream is capable of generating packets of Layer2, IPv4, IPv6, TCP, UDP, TCP-IPv6, UDP-IPv6, ICMPv4, ICMPv6, IGMPv2, ARP, Pause, Goose and custom Each stream support multiple levels of VLAN and MPLS Signature block is optional in each stream Each stream supports user-defined packets and packet length from 60B to 16KB Payload generation mode: Cycle, Incremented, Random
Traffic Statistics	Statistics results can be displayed in the form of data table and chart Each port can receive up to 1024 streams Traffic statistics based on streams: TX/RX frame count, TX/RX rate count, RX frame Sequence miss count, RX frame IP payload check errors count, Maximum, minimum and average SF latency count, Maximum, minimum and average CT latency  Traffic statistics based on ports:  TX/RX frame count, TX/RX stream count, TX/RX rate count, RX frame IP header checksum errors count, RX frame FCS errors count, frames through user-defined filters count (filter patterns include VLAN, MPLS, PPPOE, ARP, IPv4, IPv6, TCP, UDP)
Traffic Capture	Each port provides 256M bits capture buffer RX data frame capture TX/RX control frame capture Frame capture based on filter templet Decode hundreds of protocols Support captured frame search according to specific conditions Intuitive display of frames’ features such as source IP address, destination IP address, type of protocol and etc.
Protocol Emulation	Layer 2-3 Protocol Emulation
	Integrated IPv4 and IPv6 dual stack Protocol emulation on RIPv2, RIPng, OSPFv2, OSPFv3, ISISv4, ISISv6, BGP4, PPPoE Client, DHCP Client, IGMPv2, IGMPv3, GMRP, 802.1x, LDP, 802.3ah
	Layer 4-7 Protocol Emulation
	Data	Each port supports wire-speed traffic generation TCP connections per second: 2 Million  TCP concurrent connections:32 Million Support HTTP Support FTP
	Support comprehensive multilayer testing though Layer 2 ~ 7
Software Support	TeleExplorer test system  TeleAPP - Test suit of RFC 2544/RFC 2889/RFC3918
Chassis Available	TestStorm200
Others	Easy-to-use graphical user interface Support TCL API for customizing tests