V6000 Series Test Modules

Network Communications Tester
Comprehensive Ethernet Tester
V6000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V6000 series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment, quality control, performance monitoring and production line.
V6000 Series Test Modules deliver complete network protocols testing and emulating functionality on BigTao series test platform. V6000 series may meet the test requirements of all kinds of networking devices in each stage of R & D, experiment, quality control, performance monitoring and production line.
With support of larger number of streams, higher port density and larger traffic capture memory, V6000 series offer a best cost-effective test solution.
V6000 series support a full IPv4/IPv6 stack. Each port can generate 64 streams with up to 4 variable domains per stream and simulate hundreds of thousands of interfaces and tens of millions of realistic connections.
With plenty of protocol templates and customizable packet payload and rate, V6000 series can provide complex protocol test and emulation.
V6000 series are supported in high performance chassis of BigTao200, BigTao6000 and BigTao12000, providing accurate chassis-to-chassis synchronization.
KEY FEATURES
Support RJ45 interface on 10/100/ 1000Mbps and SFP on 100/1000 Mbps   
Support line-rate traffic generating and analysis   
Integrated IPv4 and IPv6 stack, support layer 2-3 network testing   
Support a variety of protocols emulation including RIP, OSPF, ISIS, BGP, IGMP, PPPoE , DHCP, etc.  
Accurate and dynamic data rate regulation based on port and stream   
Line-rate traffic capture with support of packets editing, filtering and searching   
Embedded PC running Windows XP for separately operating   
Multi-user login with easy remote access via a network   
Support customized error packet generation   
Graphical user interface for configuration, data capture and real-time analysis   
Test suit based on RFC2544, RFC2889 and RFC3918
SPECIFICATION LIST

Model	V6000 Series
Port Number	Up to 16 x 1G ports per module
Port Rate	RJ45: 10/100/1000M SFP:100/1000M
Physical	Status Indicators: Tx/Rx Weight: 0.6kg Size: 271mm x 35.5mm x 180mm  Peak power requirement: 40W Max
Traffic Generation	Traffic generating based on port and stream, per port have up to 64 different streams Each stream provide up to 4 saltus step domain Accurate data rate regulation based on port and stream, support dynamic data rate regulation Each stream is capable of generating packets of IPv4, IPv6, TCP, UDP, TCP6, UDP6, Ping, IGMP, ARP, etc. Each stream support multiple levels of VLAN and MPLS Signature block is optional in each stream Each stream supports user-defined packets
Traffic Statistics	Statistics results can be displayed in the form of data table and chart Each port can receive up to 256 streams Traffic statistics based on streams: TX/RX frame count, TX/RX rate count, RX frame Sequence miss count, RX frame IP payload check errors count, Maximum, minimum and average SF latency count, Maximum, minimum and average CT latency  Traffic statistics based on ports: TX/RX frame count, TX/RX stream count, TX/RX rate count, RX frame IP header checksum errors count, RX frame FCS errors count, frames through user-defined filters count
Traffic Capture	RX data frame capture TX/RX control frame capture  Frame capture based on filter templet  Decode hundreds of protocols Support captured frame search according to specific conditions Intuitive display of frames’ features such as source IP address, destination IP address, type of protocol and etc.
Protocol Emulation	Integrated IPv4 and IPv6 dual stack, support ARP, NDP, Ping Each port can simulate tens of thousands of interfaces and support sub-interfaces Each port can simulate tens of millions of realistic connections Protocol emulation on RIPv2，RIPng，OSPFv2，OSPFv3，ISISv4，ISISv6，BGP4，PPPoE Client ,DHCP Client，IGMPv2，IGMPv3，GMRP，802.1x，LDP and 802.3ah
Transmitting mode	Continuous, Single burst, Multi burst, Time burst and Serialized
Software Support	TeleExplorer test system, Test suit of RFC 2544/RFC 2889/RFC3918, TeleATT – automated Test system for product line
Others	Easy-to-use graphical user interface Support C++, C# and TCL API for customizing tests

Related Module List

Module Name	Ports Per Module	Connecter Type	Single Rate
V6016C	16	10/100/1000M RJ45 Copper	10/100/1000 Mbps
V6016F	16	1000M SFP Fiber	1000 Mbps
V6016M	8+8	10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber	10/100/1000 Mbps and 1Gbps
V6012C	12	10/100/1000M RJ45 Copper	10/100/1000 Mbps
V6012F	12	1000M SFP Fiber	1000 Mbps
V6008C	8	10/100/1000M RJ45 Copper	10/100/1000 Mbps
V6008F	8	1000M SFP Fiber	1000 Mbps
V6008M	4+4	10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber	10/100/1000 Mbps and 1Gbps
V6004C	4	10/100/1000M RJ45 Copper	10/100/1000 Mbps
V6004F	4	1000M SFP Fiber	1000 Mbps
V8008F	8	10G SFP+ Fiber	10 Gbps
V8004F	4	10G SFP+ Fiber	10 Gbps
V8002F	2	10G SFP+ Fiber	10 Gbps
V9002F	2	40G QSFP+ Fiber	40 Gbps